Epson Printer Error Code 0X60 - How to fix

Epson Printer Error Code 0X60 - Usually Epson users experience an error called Epson error code 0x60 or 60H. If your printer has sensor problems, this error will be displayed. These sensors are also called PW sensors. You can find them on the printers. Some Epson models are prone to this error, such as B-500, B-300, B-508DN, B-308, B-518DN, B-310N, B-318N, B-510DN. However, before you panic and find an Epson printer repair service provider, you can try to fix this error yourself.

Epson Printer Error Code 0X60


From organizations to individuals, they specialize in catering needs of all types of consumers. However, sometimes these devices can break down. Regular use, component failures, etc. can be the reason for problems with your printer, including error codes.


Simple Steps to fix Epson error code 0x60

First you need to clean the sensor part


Step 1: Clean the sensor

Clean the sensor with cotton. Moisten it a little and then apply it to the sensor. If you can't find it, refer to the manual for the exact location.


Step 2: Remove all sticky paper.

Look under the right side carriage for pieces of paper or tiny objects. Sometimes stuck pieces of paper are also responsible for Epson printer error code 0x60 or 60H. Carefully open the printer and clean it thoroughly. Be sure to remove any smaller pieces to avoid the risk of paper jams.


Step 3: Delete the last installed programs.

Go to the Control Panel and click on the "Uninstall a program" option. Now, right-click on the software that you want to remove or uninstall and then click on the "Uninstall" option.


Step 4: Check for the latest updates and download them

Find the "Start" button, click on it and type Windows Update Message into the search box. After typing, click the "Check for updates" option. Now find the latest updates and download them.


Step 5: Run a tool

You need to use and run a tool that can perform deep scan process and recover corrupted Windows system files. Here, you just need to click the Start button and then type the command "CMD" in the search box that you can find below. Now, right-click on "CMD" to run the administrator account. In the Command Prompt section, type "sfc / scannow" and press the "ENTER" key to continue.


Step 6: Log in to Safe Mode

Use a network tool to check if the error persists in Windows. Click on the "Start" button and type MSCONFIG. In the pop-up dialog box, tap the "Boot" icon and then in the "Boot" section, tap the "Safe boot" icon. After that, click "Network and restart the computer" and finish the process.

Previous
Next Post »
Comments


EmoticonEmoticon